Tilt Wheel / Swing Pedal
Brake - Continued
Custom Application
<BACK TO PAGE TWO
FINISHING
THE ROUGH IN
 Again,
you see a view of the hardware all bolted up and test fitted together. You
also can see all the wiring and switches that are usually hidden in a stock
application. This area will be covered later by carpet and trim covers. All
that is left to do is the floor plate and some paint. The steering linkage is
also on our list of thing to complete.
BLAST &
SPRAY
 Next,
we blasted all the under dash parts as well as the steering linkage. We wanted
these parts to disappear under the dash, so black is the best color for this
type of camouflage. Painting of parts also provide good rust prevention and
makes your work look professional. Allow enough time for all your part to dry
well before installing them. Since most do not have access to a blasting
cabinet, a wire brush on a drill motor or bench grinder with a wire wheel will
work just as well.
 [more]
<BACK
TO PAGE TWO - NEXT PAGE>
| 
